Anycubic Kobra MAX nozzle wiper bed mount (Fixed)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for A1 mini silicone brush.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 32
- Makes
- 0
- Views
- 228
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
After few months of occasional printing part warped so if you want to use this I strongly recommend driling a 3mm hole through steel bed (carefully on the edge) and with some heat inserts attaching this wiper mount to it. This will make the mount much much stronger at will keep the whole mount on the same place. Even with this attachment it provides decent amount of flex when nozzle is going through the brush. I used M2 8mm screws with m2*4 heat insert.
Simply makes possible to use A1 mini silicone brush screw to bed from it's underside. It sits flush with the bed and the mount is sligthly flexible so even when hotend is pressing against it with 45% infill it is strong enough.