Anycubic Kobra MAX nozzle wiper bed mount (Fixed)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for A1 mini silicone brush.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
After few months of occasional printing part warped so if you want to use this I strongly recommend driling a 3mm hole through steel bed (carefully on the edge) and with some heat inserts attaching this wiper mount to it. This will make the mount much much stronger at will keep the whole mount on the same place. Even with this attachment it provides decent amount of flex when nozzle is going through the brush. I used M2 8mm screws with m2*4 heat insert.
Simply makes possible to use A1 mini silicone brush screw to bed from it's underside. It sits flush with the bed and the mount is sligthly flexible so even when hotend is pressing against it with 45% infill it is strong enough.