Core One Pressure Advance Calibration

!!!WARNING!!!! This G Code is for Prusa Core One only, I dont know if this will work with other printers. Print at your own risk, this worked perfectly for me, but you may have a slightly different set up or G Code modifications/settings that may affect the file/print differently. Double check the G Code in the layer slider and make sure your settings are correct. I am not responsible for any damage.

Now that thats out of the way, this is the same model as the one I remixed it from just with the G Code already added specifically for Prusa Core One to test Pressure Advance and is slightly taller. This will go from 0.000 - 0.5 pressure advance value. The layer height is for 0.4 nozzle and will have to be changed per what nozzle size you have.

EDIT: I've added a taller version to make it a bit easier to see where the best layers are, HAPPY PRINTING!!!!

Print Settings:

-0.3 layer height (or 75% of your nozzle size if you have anything other than a 0.4 nozzle)

-1 perimeter (not vase mode)

-0 top layers

-1 bottom layer

-0% infill

-Set perimeter speeds to 100mm/s

-Turn off dynamic overhang speeds.

-Disable auto cooling

-Disable dynamic fan speeds

To calculate PA value after the print is done use this equation:

0.000 + measured height * 0.005 = new PA value.

These links are for the 2 websites that I got the equation and some of the settings from if you want more info:

https://www.klipper3d.org/Pressure_Advance.html

https://all3dp.com/2/klipper-pressure-advance-simply-explained/