James Webb Telescope Mirror
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.82 – €1.00 net (excluding VAT)
For file: JWT_Center_58m_0.20mm_205C_PLA_ENDER3.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.91 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 58.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Combo of 3d prints and other parts that make a mirror that looks like the James Webb Space Telescope.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 13
- Makes
- 0
- Views
- 163
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a James Webb Space Telescope that only uses 3d printed parts for the outside and center piece. I wanted a version that wasn't entirely 3d printed so I used wood as the back board which allowed me to save money and plastic. Sizing was dictated by the gold hexagon panels I got. The center wood hexagon is 297.6mm from center to corner and 257.1mm from center to edge as seen here.
I got the wood from Lowes, doesn't matter type as long as its ½" thick. I stained it black and glued the edges to the edge. The gold mirrors have stickers built in and they stick just fine but they have little warps so they aren't great as a functional mirror but it still looks really cool.
https://www.amazon.com/dp/B095P7NZZS?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1