1 / 5
Centauri Carbon Mainboard Fan-Chassis Isolator
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Take the edge off the Centauri Carbon's mainboard fan drone/buzz with this model.
- Rating
- 5 / 5
- Likes
- 102
- Downloads
- 360
- Makes
- 4
- Views
- 2,859
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Are you tired of that mainboard fan drone coming from underneath your Centauri Carbon? Often heard in between prints during cool-down or when anything on the printer is active. This takes the edge off the annoying sound by decoupling the fan from a rigid direct connection to the chassis and by moving the air through a short duct. This isolator, printed in TPU 95A, fastens to the mainboard fan mount using M3 screws. The fan slides into the isolator and plugs into the board. No screws are needed to keep the fan in place.