Ultra Stable Mod for Windmill
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.12 – €0.15 net (excluding VAT)
For file: ABS CoreOne / 50mm_abs_coreone_9m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.14 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 9 min
- Source material
- ABS
- Estimate material
- ABS
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Axle and Rod optimized for horizontal and stable printing.The Axle and Rod fits my Windmill Collection.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 93
- Makes
- 1
- Views
- 390
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mod changes the axle and the rod of my Windmill Designs to a horizontal print!
You can print now all parts horizontal with a press fit connection, to make the whole Windmills "ultra stable".
Assembly:
https://youtu.be/8U0r30BUhpI?si=WMZ-ExEHWdkbMBvb
You can use a tiny bit of glue in addition if you want.
There are 3 sizes of the axle:
- 30mm useable for 2 propellers
- 40mm useable for 3 propellers
- optional 50mm length for more distance
The ultra stable rod & axle fit the complete Collection:
Some Examples:
This mod is released a long time ago for my subs on Patreon now i free it. I did some little rework to the old file to give a good fit and added small ridges to the axle so it won’t come out of the rod so easily.
Happy Printing!😊👍