True charging stand for PHILIPS MG5720
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€8.75 – €10.69 net (excluding VAT)
For file: PHILIPS STAND_SINGLE COLOR_0.4n_0.2mm_PLA_MK4IS_7h1m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.72 excluding VAT (range midpoint).
- Weight reported by the author
- 178 g
- Print time reported by the author
- 7.02 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Smart charging stand for the Philips MG5720 – protects your battery, organizes your gear, and prints like a dream.
- Rating
- 0 / 5
- Likes
- 70
- Downloads
- 100
- Makes
- 0
- Views
- 930
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
This is a custom-designed charging stand for the Philips MG5720 trimmer that does more than just hold your device. It features a unique lever-actuated mechanism that lets you hide or reveal the charging connector, helping you avoid one of the most common mistakes with charging docks: leaving the trimmer constantly plugged in, which can reduce battery lifespan over time.
With this dock, you only connect the charger when you need it – keeping your battery healthy and your workspace tidy.
The stand includes three snug compartments for your favourite trimmer attachments, so everything is always within reach.
Designed for easy 3D printing:
- No supports needed
- Clean overhangs and strong geometry
- Tight tolerances tested with the original charger and attachments
Assembly guide included:
A PDF manual with clear assembly instructions is included in the files to make final setup simple and frustration-free.
For assembly you will nees:
- M3X20 countersink screw 4x
- 8mm untislippery silicone pad 4x
Built through real-world iteration:
From idea to final version – each prototype helped shape the stand into what it is now.
Included are both a multicolor version with a separate logo piece, and a single-color version for simpler prints.
For the multicolor version, use the "Split to parts" function in your slicer to assign different colors.
Print settings used for testing:
- Printer: Bambu Lab P1S with AMS
- Nozzle: 0.6 mm (0.4 mm will also work)
- Layer height: 0.24 mm
- Perimeters: 2
- Infill: 15% gyroid
- Material: PLA
All parts were tested for fit and function with this setup. Tolerances should be forgiving across most well-calibrated printers.
Inclued also STEP file for easy remixing to your needs!
I’m happy to hear any feedback, suggestions, or print results – feel free to share your thoughts or makes!