25 mm Calibration Cube – Accurate 3D Printer Test Block
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Test your 3D printer's accuracy with this 25 mm calibration cube for X, Y, and Z axis tuning.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 103
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
This calibration cube is a precision 25 mm × 25 mm × 25 mm test model designed to evaluate your 3D printer’s dimensional accuracy. Whether you're setting up a new printer or fine-tuning your print settings, this cube helps verify calibration across all three axes (X, Y, Z).
🛠 Model specs:
Dimensions: 25 × 25 × 25 mm
Solid cube with sharp, well-defined edges
Optimized for FDM/FFF printers
Layer height tested: 0.2 mm
Suitable for PLA, PETG, and other standard filaments
🔍 Use case:
Print the cube and measure all sides with calipers. If there's deviation from 25.00 mm, adjust your step/mm settings in your firmware or slicer accordingly.
🧠 Tip: Print with 2–3 perimeters and 15–20% infill for fast calibration results.