MBa8MP-RAS314 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a case for the MBa8MP-RAS314 with a fan
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 29
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Printing Parameters :
- print at 0.2mm layer height to make some overhangs work properly
- don't use supports
Assembly :
- insert 4 m3x4 heat inserts in the holes surrounding the fan inlet of the top half
- insert 4 m3x4 heat inserts in the bottom holes of the bottom half
- use a 40x10mm fan and screw it to the inside of the top case, use screws with a low head height (~1mm)
- in order to power the fan you will need to provide you own solution (for example DuPont cables drawing 5V from the 40-Pin Connector), as the MBa8MP-RAS314 doesn't come with any other accessible headers
- to assemble the case place the MBa8MP-RAS314 in the bottom half of the case, add the top half and screw the case together using 4 m3x40 screws