MXR M108S Back Plate / Base Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Created a base plate for the MXR 108S 10 band EQ pedal. This is for pedal board use that has Velcro for attachment.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Public Domain
Recommended settings…
- Print with the flat side down, use supports in the flat screw areas (the corner screws), it's not necessary to use support on the inner screws.
- 3-5 outlines/perimeters
- 5 top + 5 bottom solid layers
- 20-30% infill (I don't think it uses much due to thickness, you could probably do all solid layers)
- I did in this in FlashForge PLA, could prob do PETG too. Use whatever you like.
____________________________________________________________________________________________
Created a base plate for a Dunlop MXR M108S 10 Band EQ. No one seems to have created one so I made it in Rhino 3d. It is a tiny bit thicker than the original metal base plate, but this was necessary because it seemed to flex a bit when screwed in. All the screws are countersunk a lot better than the original metal plate as well with the added bottom thickness. I sanded the bottom of mine (you can see in the main image), hoping the Velcro will stick well when I put it on.
It probably doesn't matter much, but I recommend screwing the corners in with an X pattern one at a time, and to alternate between the 2 central screws. I felt that the screws were a tiny bit tight going in (probably from the super minute differences in hole placements). This is actually my 2nd version of the base plate and it is immensely improved. I measured the centers of all the holes with digital calipers this time, and the fit seems spot on.