Prusa Mini display backplate (no supports required)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple cover that can be screwed onto the back of Prusa Mini display, this time with 99% less support removal!
- Rating
- 5 / 5
- Likes
- 44
- Downloads
- 242
- Makes
- 21
- Views
- 999
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Printing Instructions
Print on it's flat face without supports, just remove and tidy up the single sacrificial layer where the screws go, a sharp knife is a good tool for the job. I printed mine in black Prusament PETG on the Prusa Mini using a textured build plate.
Installation
First, unplug the LCD display cable on the back of the display. Then remove the display from the printer with the single M3 bolt. You can then remove the 4 M3 screws holding the display in place, and place the printed cover in. Reinstall the 4 screws and tighten gently. Reattach the display to the printer and finally, plug the display cable back in.