Baby Groot Can Holder / Beer mug
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Can Holder for 0.5L Cans (12oz can inserts) - In style of the Baby Groot
- Rating
- 3.667 / 5
- Likes
- 178
- Downloads
- 760
- Makes
- 2
- Views
- 2,107
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Standard Digital File License
Baby Groot Can Holder
Fits long EU cans with a capacity of 0.5L. You can also use my insert for 12oz cans (link below), but in this short model, it's my 10mm riser probably enough to fit a 12oz Can.
Recommended print settings: PLA, 0.2mm layers, 2-3walls, 8-10%gyroid, Tree supports (at least 25°)
Here is the link to my model of the insert that you can use in 0.5L holders with your 12oz cans, and 10mm riser if you want better access to the top. Both are scalable, so you can make them smaller or larger in your slicer.
https://www.printables.com/model/1322047-can-holder-riser-insert-scalable