Extended Corner Wago Mount (221-415) for Voron Trident - Inverted Electronics & Deck Plate Clearance

This is a remix of the stock Voron Trident wago_221-415_corner_mount.stl, specifically modified for builds using inverted electronics and to provide crucial clearance for the deck plate.

If you're running inverted electronics on your Trident and find the standard corner Wago mount sits too close, preventing your deck plate from fitting properly or being easily removed, this extended version is designed to solve that.

Key Features & Modifications:

• Remix of: wago_221-415_corner_mount.stl (Credit to the Voron Design team for the original)
• Designed For: Wago 221-415 series connectors.
• Inverted Electronics Compatible: Tailored to fit seamlessly within an inverted electronics bay configuration on a Voron Trident. https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/LoganFraser/TridentInvertedElectronics
• Enhanced Deck Plate Clearance: The primary modification! This version is extended/offset to create additional space, ensuring your deck plate can be installed and removed without interference from the mount or wiring.
• Secure Corner Mounting: Provides a stable and convenient mounting point for your Wago 221-415 connectors in the corner of the electronics bay.
• Organized Wiring: Helps keep your Wago terminal wiring tidy and accessible.

Why I remixed this:

• The original wago_221-415_corner_mount.stl worked great, but with my inverted electronics setup, it didn't leave enough room for the deck plate. This remix extends the mount to provide that necessary clearance.

Print Settings (Voron Standard):

• Material: ABS or ASA
• Layer Height: 0.2mm
• Extrusion Width: 0.4mm
• Infill Percentage: 40%
• Infill Type: Grid, Gyroid, Honeycomb, Triangle, or Cubic
• Wall Count: 4
• Solid Top/Bottom Layers: 5
• Supports: no

Hardware:

• Uses the same hardware as the original wago_221-415_corner_mount.stl.

Installation Notes:

• Mounts in the same corner location as the original part.
• Ensure you have enough slack in your wiring to accommodate the slightly repositioned Wagos.

DISCLAIMER: 

This 3D model is provided "as is," without any warranties of any kind, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, and non-infringement. The creator of this file shall not be held liable for any damages, losses, or injuries arising from the use or misuse of this model, including but not limited to direct, indirect, incidental, consequential, or special damages. By downloading, printing, or using this model, you acknowledge and agree to assume all risks associated with its use. You are solely responsible for ensuring the model's suitability for your intended purpose and for taking necessary safety precautions during its use. 

USE AT YOUR OWN RISK.