Scraper with 60 mm trapezoid blade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The scraper handle for 60mm trapeziod blade with four holes.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 193
- Makes
- 2
- Views
- 1,045
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original handle of my scraper was not holding the blade, while I was removing a sticker, so I created more secure handle.
The blade can be easily pressed into the handle and sits firmly without play. From above the blade is secured by holder - M3 screw and nut are required to connect both parts. The cover snap in and secures the blade, when not used.
Approximate dimensions of the blade:
- length: 60 mmm,
- width: 18.7 mm,
- thickness: 0.65 mm.
Required for assembly:
- 1 x imbus screw M3 x 6 mm,
- 1 x hexagon nut M3.
Print settings:
- Layer height: 0.2 mm,
- Perimeters: 3,
- Solid layers - top/bottom: 5 / 5,
- Supports: No *).
There is additional file "bladeinterface" - it enables quick check if the blade will fit into the handle.
I printed my handle with PLA, but PETG should work too - for first checks of blade interface dimensions I used already PETG and result was fitting well.
*) Actually in final version of blade holder I used support in screw hole, to get better surface.