Large Layer Testing Cones
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A print to test printing large layers to see if filament will fully stick or not.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
With the Bambu P1S and a 8mm nozzle and 0.48 or 0.56 layer heights I kept on having issues with filament not sticking to itself while printing so I created this model to test out what would fix it.
You print this model like a pyramid.
You can also cut it so that it's not as tall but this is a pretty small height.
Unfortunately, the only solution I found so far is Scarf joint seam plus Scarf around entire wall with Scarf joint for inner walls also enabled but this can increase print times by up to 25% depending on the model.
For now I've stuck to 0.4mm layer heights which doesn't exhibit this issue.