Thule 525 Upride Bike Roof Rack Adapters Frame Grabber
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upgrade your old Thule 525 Upride w/ this more robust/gentle grabber - PETG-CF & TPU matl- Additional Hardware Required
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 6
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
If you have a Thule Standard Upright Bike Carrier 525 (made between 1997-2001) and don't like the frame grabbing design, or can find one of these bike racks super cheap, this frame grabber upgrade will more securely (and softly) hold your bike, compared to the hard plastic that was originally on there and can scuff/damage your frame. Plus it's INFINITELY easier to secure a voile strap than their awful locknut design.
PLEASE NOTE - this does not lock in any way. IF that is a problem for you please secure the bike with another locking mechanism. For us we just use this to transport bikes to/from the campground, so it's a non-issue generally.
Printing
More walls = Better
For the TPU middle piece:
- 0.6 Nozzle
- 0.18 - 0.3 layer height
- 5-10 walls (I did 8)
- 25% gyroid infill (or more)
- no supports
- Arachne
For the PETG-CF outer pieces
- 0.6 Nozzle
- 0.18 - 0.3 layer height
- 5-10 walls (I did 8)
- 35% gyroid infill (or more)
- no supports
- Arachne
Orca and Bambu Studio print profiles for A1 Mini provided
Additional Hardware
Requires:
- 1x Voile Strap
- 4x M8x60, M8 Washer, & M8 Nylock Nut
- Recommend 0.5kg each of PETG-CF (~150g) & TPU (~200g) material
Assembly
- Unbolt all the old hardware at the ends of arms (Highlighted in yellow in exploded view image)
- Slide on PETG-CF and TPU parts until bolt holes line up with holes on the arms.
- Bolt M8 bolts thru arms.
- Thread voile strap thru slots provided.
- Secure frame with Voile strap
Disclosures
I do not work for THULE nor am I representative of their brand in any way, shape, or form.
I also do not take responsibility for damage or injuries caused by misuse of this model, because once it is sliced/printed it is outside of my control.
I spent a fair amount of time and money prototyping, printing and crafting this model, so please take the time to provide feedback (positive or negative).