Counting matching models…
This handy tool attaches to the outside of motorcycle chain oil cans, and enables you easily oil the chain with one hand. It splits the oil path from the outlet tube into two and places the oil over the rings where it is supposed to go.…
Stand for the Lego Millennium Falcon (ref. 75257). Glue all parts. RELEASE 09/04/2025 Publishing the files in STEP format for customizing.
Extrusion corner brackets with built-in plates. Short and tall versions for 2020, 3030, and 4040 extruded aluminum -- and now with 2525. Print three of each for each corner. I like to break things down to essential patterns and make…
The original one is very good, but I preferred to move it on a support more towards the back of the stand so that the millennium falcon is more centered, I find it prettier visually.
Remixed to fit a 525 chain, added overspray guard, and added holes to spray the x-ring/o-rings in addition to the plates and rollers.
Chain Oiler for 525 motorcycle chain for optimal oring lubrification 0.1mm 15% in fill
Motorcycle Chain Lube Tool (525/530) Tool for lubrication of a 525/530 motorcycle chain. Print text down, no supports required. Use a releasable zip-tie through the channel to secure the tool to the aerosol. Cut the straw to length, so it…
Reference CAD files for Fusion 360 for design of mounts, etc. Measured from part Fusion 360 f3d file included
The 3D printed mount is designed to perfectly fit the Ikea Tradfri motion sensor, ensuring a snug and secure fit. Whether you prefer a more permanent installation with screws or a flexible and removable option with magnet, this 3D printed…
This model is compatible with the lego system.
Two piece handle for Series 25 (25mm / 1in) Aluminum Extrusion Uses two 16mm M6 flathead screws Included step file incase you need to make changes. My hards are on the small side. I printed it upright, and on the side. And I think the…
Chain oiler for 525 motorcycle chain. Optimal oring lubrification For IPONE big can (diam 63mm) 0.1 mm layer height
Per VOGE Valico 525DSX DSX525 DS525X DSX 525 DSX accessori serbatoio liquido
Ingrassatore per catena moto con passo 525. Il modello in questione non ha bisogno di supporti duranti la stampa. Consiglio di posizionare l'oggetto come da foto.
This is a Remix, but i can´t find the Original Post. A simple Webcam mount for my Prusa i3 MK3s and the Webcam Logitech C525. You need to disassemble the webcam housing, but that is not too difficult and saves a lot of space. If you want…
Wanted a cover for my C610 that just worked. Designed this in Fusion 360 and it works great! The thin ring front means you can see the LEDs on the camera when they're on whether the cover is opened or closed. This uses a print-in-place…
Makita DUH 525 Akku Heckenschere Wandhalterung Wall Mount
This model is compatible with the lego system.
I've remixed this stand to be more sophisticated and less massive design
Support permettant de ranger verticalement une débrousailleuse thermique Husqvarna.
My boys damaged all 4 stakes for Bruder timber truck, so I design them for fun. After few iterations, they works like genuie parts. No further damage on prited parts - tested :-D Printed from ABS, maybe PETG would also work. Printer:…
Made this privacy cover for my Logitech C525 webcam. It consists from two parts and does not require any screws or additional materials, just print. Print holder facing lens part down (as shown on one of the images) with supports, so…
Diese Säulen oder auch Ständer sind für das LEGO-Modell: Millennium Falcon 75257. Damit nimmt das Modell nicht ganz so viel Platz im Regal weg und kommt damit auch noch besser zur Geltung :-) Der Druck kann eine Füllung von 10% (Linien)…
A simple Cam holder for Logitech C920 for Sovol SV06. Its a modified C920 Cam. I removed the monitor mount.
Elevate the way you display your Lego creations with this custom-designed wall mount for the Lego 75259 Snowspeeder 20th Anniversary Edition. Meticulously crafted for Lego enthusiasts and collectors, this wall mount is engineered to…
This tool helps to lubrificate the chain of your motorbike. The lubricant will be applicate in the right place of the chain. It will be sprayed anymore on the ground or on your motorbike…
I wanted to use an old Logitech C525 I had laying around for use with my Octoprint setup. The easiest thing I could think of was to simply print an adapter that would let me mount the webcam securely to a standard tripod.
Earbud clips. Fits to PHILIPS SHB5250. Print instructions Category: Audio Summary Earbud clips. Fits to PHILIPS SHB5250. Print Settings Printer: Anet A6 Rafts: No Supports: No Resolution: 0,06 Infill: 100%
I was restoring vintage Pioneer receiver and three buttons were missing so I created this model. There are two options, one is to print the assembled model in one go or you can print two parts. I think the two parts option would let you…
ORGANIZER GT525 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
This is a wall mount to attach the VM5254 Baby Monitor to a wall using Wall Screws and one M4 Nut and Bolt. My second hand baby monitor didn't come with the mount.
This is an easy remix of fasteddys “hinged privacy shutter for a Logitech C615 webcam” to fit on logitechs c525 model. I raised the back slides to be longer, so it also reaches the cable of the c525 webcam. That makes it more stable. I…
I printed https://www.printables.com/model/142759-prusa-mini-camera-mount-remixed which works great except it doesn't securely hold my webcam. I designed a compatible adapter by remixing the webcam holder with another C525-specific holder…
I didn't like the camera mounts that came with the cameras since they were kind of flimsy and required me to put holes in my walls. I printed this to use with command strips but you still have the option to use screws.
Fits the M525 mouse and clicks into place. V2 is updated to have an even better fit. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: Hatchbox PLA Silver Notes:…
This tool mount fits cheap laser modules like the one shown above. Mine is this one: https://www.fasttech.com/products/0/10031062/6790301-405nm-500mw-violet-laser-module-for-diy-laser The fusion 360 file is included if yours has different…
Bracket to mount an Logitech C525 webcam on the Ender 3. Used the open source drawings for the X-limit-switch bracket to design a new bracket. Topological optimization is used to generate the structure between the limit-switch bracket and…
This camera rail-mount / holder allows you to change the height and Z-axis rotation of your camera. Using the joint on the camera you can also change its pitch. The rail can be mounted vertically on the leg/side of the enclosure. You can…
Boss HP Box – Hidden 0–525 HP Tracker and Dice Tray UPDATED SLIDE Keep your boss battles organized while keeping the boss’s exact health hidden from the players. This Boss HP Box is a physical hit-point tracker for D&D and other tabletop…
This is a simple pole mount for an AcuRite 01525 Personal Weather Station. One end is shoved up the sensor's hole... while the other end slips over the pipe's shaft. ;) I believe the metal pipe I am using is 1-1/2" OD.I have included…
Dummy 13 Italian Halbert 1525 Modeled from a Halbert at found Museo Medievale De Bologna Italy These are printed on a Bambu A1 with standard settings The versions with the extra blockers on the bottom require supports only on the…
I saw a bunch of mounts for a C270 type of camera for my Prusa i3 MK3S but I had bought a C525. I didn't realize it at the time but the C270 has a screw that allows you to remove the folding mount so you can use the hinge to mount it to…
My wife's EPSON document camera has become broken under warranty. I needed some temporary replacement for her work while the EPSON is being repaired. So I've quickly, made a stand for Logitech C525 webcam to make it a makeshift Document…
Simple webcam mount for Logitech C525 webcam for the inside of lack table enclosure.
Disclaimer: This design is an independent creation and is not affiliated with, authorized by, or endorsed by the LEGO Group. It is designed to be compatible with standard building blocks. This brickvariation corresponds to the Lego 45°…
Elevate the way you display your Lego creations with this custom-designed stand for the Lego 75259 Snowspeeder 20th Anniversary Edition. Created in Fusion 360, this design is a must-have for any Star Wars Lego collector. You can choose if…
Added slip on sleeve mount with 0.2mm clearance for a solid firm fit onto VIVO monitor arms. Very solid with no flex when removing and adding connections. Printed in PETG-CF. 0.2mm layers. 3 Walls with 15% infill PETG in anticipation of…
Gigabyte GA-D525TUD IO Shield
Logitech C525 Privacy Cover, with add-on 6mm x 2mm magnets to retain open closed positions.
The original mounts had the rod sticking out of the top mount by around 3mm, which caused collisions with the shoulder bolt nuts I used on my printed x-axis mounts. I put a pocket in the bottom mount so the tops sit flush in the printed…
The idea of this one was to add a friend's 32" TV to a desk, vertically. Odds are few if any other people will benefit from sharing this, but you never know. This might be an average Samsung standard, so it could work with more than just…
All the credit goes to the original creators. StuTravers and Stewpercharged. StuTravers Logitech mount didn't fit my webcam, so I extended it a bit and added a hole for the USB cable which was hanging and moving my webcam all the time.…
This is an easy design pin with an integrated washer for distance purposes. It fits to many IKEA products. For example the daybed “Flekke”. Please feel free to print without waiting for mail order durance.
I recommend printing it vertically and adding supports for the top clip area. Made and tested for the WA3525 model. Untested for the larger capacity models or any generic batteries. So it may have a tight/loose fit for those. Please…
Cam Holder for Tronxy X5SA / Pro Do you like my work? then Support me https://www.paypal.me/joseprieto86/ This is a remix from https://www.thingiverse.com/thing:3384633 Print Settings Printer: Tronxy X5SA Pro Rafts: No Supports: No…
This mount holds a Logitech C525 webcam up on the "ceiling" of a IKEA LACK enclosure... or anything else you can get a few wood screws into. I wanted something to hold the camera for use with an OctoPi but still be able to easily and…
Necron Power Node structure intended as terrain made from a 525ml (17.8 oz) tin can. This can be wired for light. The "lamp" internal is a Super Glue plastic container filled with water and food coloring. Please note, the base and other…
Got the idea from this and adjusted it to mount on my Hypercube Evolution printer. The frame mount fits an 3030 extrusion T-profile with 8mm gap. The parts are press-fit together and still allow a little rotation of the webcam. Print…
PLA+ 6 layers Perimiter 15% infill No supports 0.28 layer heigh
This model is compatible with the lego system.
I use this on a rail mounted to the front of my Langmuir MR-1 CNC machine to hold ISO30 tools in their holders.
My wife's EPSON document camera has become broken under warranty. I needed some temporary replacement for her work while the EPSON is being repaired. So I've quickly, made a stand for Logitech C525 webcam to make it a makeshift Document…
Put your Millenium under highlight ;) simple base for the ref 75257 simple to print, no support, Infill 15% PLA, ABS , whatever your want except TPU ;)
Replacement for discontinued Nice PAD1250.4525 part. Best printed in PA12 without fillers. Repurposed for PH2
30° tilt to display your Lego creation with this custom-designed stand for the Lego 75258 Anakin's Pod Racer 20th Anniversary Edition. Created in Fusion 360. Do you like my models? Consider buying me a coffee .
2525 drill guide with inserts for different bits. currently 1/8in and 1/4in Clicks right into place. Can be used with 2550 extrusion by snapping off one side. Let me know if it works for you
This is ongoing project. I will update it as it progress thru possible iterations and extra parts i'll build for this toolhead. FYSETC SB COMBO v2 is an USB/CAN toolboard for stealthburner toolhead. Original stealthburner cable cover were…
Replacement for discontinued Nice BA3VR01.4525 part. Best printed in PA12 without fillers. Repurposed for PH2
Idea was to get a stiffer mounting location for the ADXL acceleration sensor. I was already using the wonderful solid Mosquito mount, so decided to remix it. Main differences: Modified for the Slice 2525 fan Relocated the mounting…
C310 box fits C510 as well. B525 is a slight adaptation of the C310 box for the autofocusing lens and screw holes that were moved a couple of mms. Use with C310 lid. C310/C510 and B525 size are 59x25.4 mm and ~ 20mm deep (including lid)…
M4 T-nut for 2525 profil Printed in PETG 100% infill. No supports is required
Save lots of money on filter replacements for your HRV ventilation unit. With this filter housing, you can easily replace the filters with a filter medium with a thickness of 20mm. You can buy a filter medium to your liking and cut it to…
This is a tool mount for the Accusize P900 series dial gauge. I bought mine from amazon.ca . The bracket on the back of the gauge fits tightly in the slot, and a screw and nut hold it in place. This can be used to level the machine by…
This is a small remix of bed holder bracket to enable usage of Igus RFRM-2525TR10x2 There are two versions with only 0.4mm difference in hole diameter just to be safe. I tested "tight fit" one and works great. Post-Printing Components are…
Building on what I learned from the first couple of paddles I made… This paddle is 13.5mm thick, with a different core design, frame width, and face thickness. I printed the paddle in PETG with 25% gyroid infill. 5 vertical walls 6…
Tren de aterrizaje para quad X525 Print Settings Printer Brand: RepRap Printer: Hephestos Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Category: Hobby
This design is based on a Raspberry Pi camera mount that I modified from Andy’s Y-axis mount for the Ender 3 V3 SE. However, once I started printing in an enclosure, the Pi camera began to overheat. That led me to dig out an old Logitech…
Anycubic I3 Mega has two pushed out holes on the X axis support box, this bracket snaps in place with out the need for tape or glue. For this model, I’m showing and using the E5150 B525 cover, but you can use any of their covers for the…
had some extra 2525 alumnum extrusion
I remixed the nut trap for my European M4 Nuts because bigger M5 screws(wich fit the original nut trap) didnt fit the tool holder and i had M4 Nyloc Nuts and Bolts laying around Category: Parts
XT60 connector for X525 frame. With source file. Category: R/C Vehicles
I really liked B-Cup's ethernet jacks, but they aren't compatible with the newer parts. I thought I would be able to at least use it for the Z axis, but my keystone jacks were too wide to fit.. So I designed new parts for ethernet…
This is a design derived from my design and other civrays. Https://www.thingiverse.com/thing:454728 Https://www.thingiverse.com/thing:1640533 Print Settings Printer: Bq Hephestos Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill:…
This is a MPCNC 525 mount for the JTech 2.8 Watt laser Some new additions in the new version are a block to hold a loc-line hose for air assist, and a post to hold a #6 screw that could be used with a touch Z-probe. I used brand name…
Holder for TPLink UP525 25W 5-Port USB Charger
If there is a problem please let me know Print Settings Printer: BQ Hephestos Supports: Yes Resolution: 0.2 Infill: 50% Category: Hobby
Rohový držák pro PIR+MW čidlo fy. Paradox, 525DM. Uvádím zde i starší model 1.0 který byl kompatibilní pro PIR Oasis. První provedení umožňují uchytit držák čidla do rohu a šrouby do bočních stěn. Varianta je vhodná (množství otvorů) i…
I built a spool holder rack from 2525 extrusion, and this lovely spool holder to hang from it. This is one of my favorite accessories. I can move filament from one printer to another. No more digging behind printers to feed or mount…
This is a clip for Philips SHB5250 bluetooth earphone. With attaching this addon to your device you will be able to hang it to your clothes. Also you can make use of it while carrying the earphone. Print Settings Printer Brand: TEVO…
Drive cover for several different dell inspiron series laptops compatibility: 1525 1526 1545 1546
Camera mounting for the Logitech C525 (without the useless mouting equipment of the camera see https://craftunique.com/forums/view-thread/2375 ) I have printed it in the orientation in that it will be mounted (upside down what thingiverse…
If you have a Thule Standard Upright Bike Carrier 525 (made between 1997-2001) and don't like the frame grabbing design, or can find one of these bike racks super cheap, this frame grabber upgrade will more securely (and softly) hold your…
----for english, please scroll down---- Die nicht mehr erhältliche Lampenlinse für den “Frontscheinwerfer” der alten Hoover-Senior-Klopfsauger zum Nachdrucken aus einem milchigweiß-transluzenten Kunststoff. Nach dem Druck die Außenseite…
🇩🇪 Deutsch Dieser Trichter wurde speziell für die Etekcity EK5250 Küchenwaage konstruiert und erleichtert das präzise Abwiegen von Filamentresten aus dem 3D-Druck. Die runde Aussparung an der Unterseite ist exakt auf die Wiegefläche der…
I don't have a link to the Pitot tube I used; it's an old, secondhand model. Mounting the PCB Holder: - Cut out the space for mounting the Pitot electronics box using the template - Cut a slot in the wing to route the Pitot tube wire to…
