1 / 6
Boss HP Box – Hidden 0–525 HP Tracker with Dice Tray — image 1
1 / 6

Boss HP Box – Hidden 0–525 HP Tracker with Dice Tray

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A magnetic Boss HP Box for D&D and other tabletop RPGs. The hidden rear slider tracks up to 525 HP in 25-point increment

Rating
0 / 5
Likes
5
Downloads
64
Makes
1
Views
279
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Boss HP Box – Hidden 0–525 HP Tracker and Dice Tray

UPDATED SLIDE  

Keep your boss battles organized while keeping the boss’s exact health hidden from the players.

This Boss HP Box is a physical hit-point tracker for D&D and other tabletop RPGs. The rear slider tracks health from 0 to 525 HP in 25-point increments. Because the numbered scale and slider are located on the back, only the Dungeon Master or Game Master can see exactly how much health remains.

Players see the health bar through the front window, giving them a general idea of how badly the boss is hurt without revealing the actual number.

The magnetic lid also includes a storage tray for dice, pens, condition markers, miniatures, or other small tabletop accessories.

Features

  • Tracks from 0 to 525 HP

  • Each mark represents 25 HP

  • Exact HP is hidden from the players

  • Visible front health bar builds tension during combat

  • Rear-mounted slider for the DM or GM

  • Magnetic removable lid

  • Built-in storage for dice, pens, and other accessories

  • Fully 3D printed except for the magnets

  • Designed for D&D, Pathfinder, and other tabletop RPGs

Required Hardware

  • Eight 6 × 2 mm round magnets

    • Four magnets in the main body

    • Four magnets in the lid

  • Superglue for securing the magnets

Check the polarity of every magnet before gluing them into place. Install the matching magnets in pairs so the lid is attracted to the body at all four corners.

Recommended Printing Settings

  • Primary material: PETG

  • Layer height: 0.20 mm

  • Walls: 3 or more

  • Infill: 15–20%

  • Main body: Supports required

  • Recommended support type: Tree supports

The health bar and slider can be printed in a contrasting color to make them easier to see. The example shown uses a gray body with a red health bar and slider.

Assembly

  1. Clean up the support material from the main body.

  2. Test the health bar and slider before installing them.

  3. Install the sliding mechanism into the main body.

  4. Confirm that the slider moves through its entire range.

  5. Glue four magnets into the main body.

  6. Glue four matching magnets into the lid, carefully checking their polarity.

  7. Allow the glue to cure before attaching the lid.

Important Slider Warning

Once the slider is installed in the box, it is very difficult to remove.

How to Use It

Set the rear slider to the boss’s starting health. As the players deal damage, move the slider toward zero. The DM can read the exact remaining HP from the rear scale, while the players only see the health bar through the front window.

Now your players can watch the boss slowly run out of health—without knowing whether it has 100 HP left or is only one good hit away from defeat.

If you print one, post a make! I would love to see your color combination and hear what kind of boss your players used it against.

Tags