Counting matching models…
Hey everyone - here's my model for the Frosthaven Algox boss! I'll avoid saying too much about the model in order to avoid any potential spoilers, but I just want to give some quick printing advice: make sure that there's some support…
I modeled up some of the warbosses wardrobe from the official mini picture and handed him one of my historic sword replicas. I especially enjoyed doing the frowny face axe. Love it. Many thanks to Carlbark for the original model and…
Hi everyone - here's my proxy model for the Frosthaven Boss, the Program Director! Not too much to write about this one; it needs a fair amount of support because of all of those mechanical hard edges and protruding shapes, but it's…
Ta statuetka powstała jako humorystyczny, ale estetyczny prezent inspirowany Excelem 📈 Idealna dla szefa, menedżera, dyrektora lub po prostu osoby, która żyje w tabelkach, wykresach i wynikach. Projekt składa się z kilku oddzielnych…
Printed with Bambulab P1S, PLA Basic and PLA Matte filaments. Sliced with Orcaslicer, I've been testing scarf joint feature. Adjust objects and texts (parts of the objects) colors. Disable ironing if you are uncertain if you are uncertain…
Print this tealight in two colors, with an opaque top and bottom (red looks good) and white or translucent middle section to allow the illumination to reveal the embossed Chinese character for “luck”. I used a “natural” PLA for the middle…
Another cookie cutter/ embosser with sharp edges - this one has vertical stripes for something different.
Podstavec s kameny pro bosse a jeho stráž do hry Karak 2. Doporučuji tisknout dvoubarevně. Tisknul jsem na MK3S+, 0.20 Quality, PLA Galaxy black a silver.…
It is a Chickenhead knob for the power control on the Boss Katana Gen 3 50 Guitar Amplifier Combo.
I have a Gator amp stand that holds up my Line 6 Powercab 212 Plus, and I don't like cables hanging down or looking at a mess of wire (at least, no more than I have to. And I worry about a cable being tripped on and my amp tipping over. I…
Design Concept The SAW-Billy the Puppet Cookie Cutter & Embosser combines functionality and thematic design inspired by the iconic character from the SAW series. It is intended to imbue your baking with a distinctive horror touch. Use…
Fill your unused water bottle bosses with lightweight/color match plugs rather than screws! NOTE: This should not be used for actually mounting anything, just plugging unused mounts.
Clay stamping wheel handle. 3Demon's texture rollers should fit to this handle. Clay stamping wheel handle. 3Demon's texture rollers should fit to this handle. Printed in upright position with brim. No supports. 0.16mm layers. Link to…
Big Boss/Naked Snake's Throat Mic from Metal Gear Solid 3. Add some fabric to the front portion and tape some string to it to make it look like the in game object, but this is the extent of 3D printed material possible. Fits an 18" neck…
Ta statuetka powstała jako humorystyczny, ale estetyczny prezent inspirowany Excelem 📈 Idealna dla szefa, menedżera, dyrektora lub po prostu osoby, która żyje w tabelkach, wykresach i wynikach. Projekt składa się z kilku oddzielnych…
Insert for the boardgame Keep The Heroes Out! with the following expansions: Boss Battles The Great Dreamer The Sparkling Guardian Playing with Fire Notes: Not compatible with Guild Master's Revenge (I don't like PVP) Not compatible with…
I needed a replacement knob for my Boss multi-effect pedal so I made this. Feel free to edit it as necessary to fit your requirements.
Increased size quite a bit. It it tight on the back with the rubber and the screws pull it in. Start the 4 corner screws loosely, then tighten progressively. Print in PETG or PLA (if it will not be exposed to high heat like in a vehicle…
store all the assesoure for your barberboss beard trimmer in one place
Made this cute lil guy to cover the downtube bosses on your bike when not in used. Will fit 28.6mm downtubes only. Do not overtorque the bolt!
The now newly working Commodore Business Machines' legendary chicken lips logo. There are an embossed and a debossed version to download, also the 3mf file contains the positive/negative objects to fiddle, tweak and create your own…
Key shaft sleeve to stop the sharp edges scratching paintwork Printed in TPU. Flat face to bed, no supports required.
This is a modular, 3D-printed candle mold system designed for clean pours, consistent alignment, and easy demolding. The parts assemble into a rigid mold body, with printed inserts that help keep everything registered while you pour and…
A plug to fit into a stripped boss hole on a mitre saw blade guard, holds a M4 nut so the blade guard can be repaired instead of buying a entire new guard. The ribbed version is a tighter fit but does not allow spin and secures better,
Bring classic battlefield aesthetics to your collection with this Medieval Round Shield Display Model . Featuring a realistic wooden plank texture, raised central metal boss, and decorative outer rim detailing, this piece blends…
Overview Designed for Starlight Instruments Focus Boss II by Optec. May also work with Optec FocusLynx but I don't have one to test with. The bracket is designed to attach the controller to a "wide" D-Series dovetail plate (NOT the…
This richly detailed fantasy spellbook features a deep red leather-style cover, reinforced metal corner guards, and a raised central arcane emblem. Decorative corner filigree and a thick bound spine give the book an authentic antique…
This model is compatible with the lego system.
C-800 is an Act 3 House Boss in Mewgenics appears after the first clear chapter Future
The original model blocks some pedal outputs (e.g., Loop Station or digital delay units) because they feature multiple output jacks.
I use these to keep cables tidy off the back of my amp by clipping them to my amp stand. Made for the Gator stand, but should also work on the Boss version or other stands using either 30mm round or 30mm x 15mm rectangular frame tubing.…
Note that the 3MF preview renders the labels as positive volumes. If you are import into a non-Orca slicer, you may need to make that volume negative. The STL already has the correct boolean. Apologies for the terrible photography, the…
Tool for Dräger PSS AirBoss height adjustment A practical tool for quick and easy height adjustment of the Dräger PSS AirBoss carrying system. This tool is designed to simplify the removal of the locking levers used for height adjustment…
"The beginning and the end of the clay pile!" Complete your 1993 roster with the ultimate antagonist: N. Boss . This high-fidelity, static-pose figurine captures the menacing, amorphous power of Mudville’s ruler. Designed as the…
Since I didn't find a model with the exact dimensions I wanted, I created my own. This is a credit card holder that fit two embossed credit cards. I printed it with PLA, default settings.
Empfohlene Druckeinstellungen Einstellung Empfehlung Filament PLA Düse 0,4 mm Layerhöhe 0,2 mm Infill 20–30 % Wandstärke 1,2–1,6 mm Perimeter/Wände 3–4 Wände Top/Bottom Layers 4–5 Schichten Supports Nicht erforderlich Brim/Rand…
Silhouette Heated Foil Embosser Box This is a custom-fitted storage box for a set of Silhouette Heated Foil Embossers. https://www.amazon.com/Silhouette-Heat-Set-Foil-Transfer/dp/B0CLF73YLT/ If you're a Silhouette-equipped crafter or are…
This is designed to vertically hold a caliper on to the lens assembly of a Boss brand laser, so you can measure the distance from the lens to the bed. By measuring that distance in different locations you can see whether or not your bed…
Bruce "The Boss" Springsteen - Born in the USA - 1984
Show who’s in charge with this stylish “Boss Lady” sign. Designed with a bold, modern look, this 3D printed desk sign is perfect for offices, home workspaces, or as a confident statement piece. A great gift for entrepreneurs, managers, or…
This is a 3x4-grid holder for MSG-501 Cable Boss stapler by Gardner Bender. This holder is compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity…
This 3D print uses a color change GCODE command Instructions on how to colorchange in PrusaSlicer : Instructions on how to colorchange in Cura Slicer : Check out my other variation of this product:…
I really love the Zelda franchise and 3D modeling. So, here is a boss key to put on your keychain or do a necklace. I've also included the model without the “adapter”. The purple model in the photo is the original size, and the painted…
Embossed replacement plate for LS-100 Luminance Meter. Plate was attached to the body via super glue, and then painted. Onshape model can be found here:…
This is my suggested solution to LeeH's embossing problem here: https://forum.prusa3d.com/forum/general-software-discussion/fusion-emboss-function/ Updated 240318 with simpler approach. More sketches but less time selecting lines.
This is a Les Paul Guitar Hero guitar battery door, embossed with the RedOctane logo (use the ThingViewer to see the logo). I created this to replace the missing door for my PS3 guitar. If you'd like either a debossed logo door or one…
Add a touch of elegance to your gardening routine with this stylish watering can. This elegant watering can is both a functional gardening tool and a beautiful decorative piece. Crafted with attention to detail, it features exquisite…
Paper Embosser Stamp Heart Liked the embosser stamp, but did not find a heart shape, so I made one. The paper may show some creases around the shape, that's normal. It's reversable so you can use it to Emboss or Deboss. Update: Added a…
Small remix to deboss the wording on the trophies. Posted 2024, 2025, and no year versions. Print facedown and do a filament swap at 0.6 mm. Download the bags from the original version to keep his D/L metrics up!
Standard desktop embossing seals come with cheap rubber feet that dry out and break over time. These replacements fit tightly, no glue required. I included two files so you can print one at a time or all four at once. Print Settings…
A simple vase with an embossed maple leaf design. Use it as an illuminated fall decoration by adding a tea light, or as a simple miscellaneous container. Saved over 4 hours of print time by slicing in Spiral Vase Mode Print Settings…
Description We've added a three-dimensional texture to the AirPods PRO2 case. Try printing it out to feel the texture. It's a bit different from other cases. Notes PLA,PET-G,TPU recommend If there are any burrs on the inside, please…
Description We've added a three-dimensional texture to the AirPods PRO2 case. Try printing it out to feel the texture. It's a bit different from other cases. Notes PLA,PET-G,TPU recommend If there are any burrs on the inside, please…
Ever wanted to print a boss key from A Link to the Past? Well now you can! This model consists of two pieces. One should be printed in black while the other in gold or yellow. If your printer is nicely calibrated then these pieces should…
This is a stop / tap tempo guitar pedal enclosure for the Boss RC-2 Loop Station. I got the name "Stap" by combining the words stop and tap. The enclosure lets you install a female 1/4 in audio jack, and a footswitch so that you can…
This feeding bowl is designed to be an interactive feeding experience for your reptiles. The overhang serves to allows insects to "hide" then re-appear, ready for your gecko to eat! The overhang is designed with a dual-purpose, and the…
requires an mlok bolt and you to assemble the holder. CA glue works best. No commercial use or sales. This is free to the public.
I really liked the Business Card Embosser by MakerSpace.Online but found that with some of the rollers, it was challenging to turn. I tried putting more clearance between the rolls but that compromised the quality of the emboss. I also…
Added Embossed text so I don't have to use my label maker. Too lazy to do magnum primers since I don't use them. I also realized these aren't really snug on the primer tube. Not a problem since they rest on the steel block and aren't…
3D printable parts for the absolutely brilliant opensource BrailleRap project taken from the primary github repository https://github.com/braillerap/BrailleRap/tree/master/printed_parts for easier access and distributed fabrication. Full…
Sturdy mirrored body cap for "The Business Card Embosser System" with tight tolerances
No overhangs. Basic and simple print Uses the original “part 2” file. I super glued Part 1 and Part 2 together using Krazy Glue. The magnets fit snug, but I also glued them.
This thing holds a ton of cards and only barely fits on a bambu printer. The 3mf file for bambu studio has the files setup to print the Cards Against Humanity logo into the lid with the AMS. For magic cards with sleeves you may need to…
I got tired of not remembering where I put my Boss Katana Go, or putting it somewhere in the way. So, I designed this to hang it. It's supposed to be a broken katana sword stuck in the wall. It would probably look better with grey…
Boss Granny : Little Red Riding Hood's Zombie BBQ Example of using displacement on very low poly ripped video game models. Many more steps than displacement on AI generated models due to differences in how models are designed for…
Summary This started as a homage to 1950s SciFi classic this island earth but and grown into something else - a MetaLoonatic, Now as a fridge magnet. Paint or print in colour the mask looks great anyway. About Print at home on your FDM…
This model is compatible with the lego system.
I noticed newer BOSS pedals made in 2024 can also contain a notched area for the 9v adapter. Some of the older pedals have the 9v plug floating, while some pedals have it justified at the bottom. I took the plate off, measured the notch,…
(In the photos, only the black&white coasters are embossed, the other styles will be uploaded as separate models.) Deboss version: https://www.printables.com/model/1083218-fifty-states-stacking-coasters-95mm-deboss-version AMS/MMU…
(In the photos, only the army green & white coasters are debossed, the other styles are/will be uploaded as separate models.) Emboss version: https://www.printables.com/model/1083177-fifty-states-stacking-coasters-95mm-emboss-version…
spool adapter for winding filament onto iBoss plastic Spools with ~53.5mm ID. It's slightly undersized with the intention to add a layer of tape for extra grip on the spool. the arbor is a 5/16" bolt Category: 3D Printer Accessories
I recently got the new BigTreeTech CPAP. the eco turbo kit. it's smaller than the original and more compact. I tried looking for a mount and nothing was out yet so had to make my own. Link to CPAP Fan I made a mount for the fan to replace…
Modified the text to be embossed
Here is a Bluetooth page turner to use with a iPad (ForScore) when you are reading music charts, I wanted to use a BOSS FS6 case but I ended up drawing it instead. I've added a bottom layer made out of Ninja flex so it can stop slipping…
I designed this model to be printed without supports. This model does not have a ‘rolling hub/shaft’ design as embossing/cutting shortbread requires substantial pressure. If you prefer, you can use the embosser/cutter without the handles…
řetěz pro drsňáka musí mít správný přívěšek. řetěz jsme našel - https://www.printables.com/model/612481-cuban-link-chain nápis musel dodělat ** A tough guy's chain must have the right pendant. I found the chain -…
Just added Malmö FF legend Bosse Larsson to the original model, painted in blue acrylic
Printed with Bambulab P1S, PLA Basic and PLA Matte filaments. Sliced with Orcaslicer, I've been testing scarf joint feature. Adjust objects and texts (parts of the objects) colors. Disable ironing if you are uncertain if you are uncertain…
A couple of embossing rolls I created for use with my embossing roller tools - a Weaver Leather Master Tools Creaser and Embosser, and a Bunkhouse Tools embossing machine. They should work with any other embosser that uses a 1" / 25.4mm…
it prints in all filament use standard printing scale to your need more depth scale z more
Dodongo Boss. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Extension for GB125 Reacher oil pan so that the oil catch is higher (replicates a part no longer included with the pan). This part is a remix; the original part matched the custom threads of the oil pan perfectly but required supports.…
Boss pedals have a rubber foot and information label that don't play nicely with adhesive velcro tape. This part allows you to easily mount to a pedalboard without any additional hardware. Remove the four Phillips screws from the bottom…
I made for a bigger project of organizing and streamlining the setup for my board game collection!! This model fits the full boss pattern deck-sleeved, containing a slide-on cover for extra protection. Deck boxes can be altered to fit any…
"Thirty" stamp for embossing cookies/cakes I would suggest ironing the top most layer for the best effect. NOTE: You will need to mirror the STL file along the y-axis so that it stamps correctly, this can be done in PrusaSlicer
The balloon horses made by blitzo and fizz in helluva boss
![[ALCH] Gardner-Bender Cable Boss stapler holder (ModuBox)](https://media.printables.com/media/prints/480707/images/3929503_d4d6d0c5-36c8-4219-a2aa-8189f3fbb773/stapler.jpeg)
