Vintage Boss Potentiometer Knob
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A clone of the knobs Boss used on their vintage rack units, i.e. the RV-1000. I bought a non-functional RV-1000 to…
- Rating
- 5 / 5
- Likes
- 56
- Downloads
- 409
- Makes
- 6
- Views
- 1,888
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
A clone of the knobs Boss used on their vintage rack units, i.e. the RV-1000.
I bought a non-functional RV-1000 to repair and noticed it was missing 3 of the knobs. This is an almost 1:1 replica, the top cap even fits in the same way.
Separate parts mean you can have whatever cap and body combo you like, the factory colours are Black (RAL 9017) and Olive Yellow (RAL 1020)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.08mm
Infill:
20%
Filament: 3DFilaPrint PLA Concrete Grey Post-Printing =============
Painting
If you have a resin printer you can probably skip this step because you won't have visible layer lines.
However, I gave the print a light sanding then used some filler primer (3 coats) and black spray paint (2 coats). I sprayed the black on a little thick and would have been better off with 5 thinner coats.Category: Electronics