Logitech B525 Camera Mount for Creality Ender 3 V3 SE
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.43 – €2.97 net (excluding VAT)
For file: B525 Ender mount_2h52m_0.20mm_250C_ABS_ENDER3.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.70 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 2.86 hr
- Source material
- ABS
- Estimate material
- ABS
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Low-profile Logitech B525 mount for Ender 3 V3 SE. Stable Y-axis view, enclosure-safe.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This design is based on a Raspberry Pi camera mount that I modified from Andy’s Y-axis mount for the Ender 3 V3 SE. However, once I started printing in an enclosure, the Pi camera began to overheat.
That led me to dig out an old Logitech B525 webcam I had in a box. I found E5150’s mount designed for the C270, C310, C510, and B525, and combined it with my modified mount. The result is a clean, stable setup with a great viewing angle.
For this model, I’m showing and using the E5150 B525 cover, but you can use any of their covers for the C270, C310, or C510 as well.
I use double-sided tape to mount it to the Y axis.
The View
Here are my Crowsnest settings
[Ender3]
mode: ustreamer
port: 8080
device: /dev/video0
resolution: 1280x960
max_fps: 10
v4l2ctl: focus_automatic_continuous=0,focus_absolute=30
Fluidd Settings
Credits
This model is a remix of these designs:
Base Mount: Modified from Andy's Y-axis mount for the Ender 3 V3 SE.
Camera Housing: Uses E5150’s B525 cover (compatible with their C270, C310, and C510 designs).