1 / 2
Talon Claw 4 (T4) - Homemade Nerf Blaster Metric Remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Metric Remix of the T4 by Captain Slug. Hardware sourced in South Africa.
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 70
- Makes
- 0
- Views
- 754
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Shipping hardware units from USA to South Africa proved too expensive. We decided to modify the files using the STEP files provided by Captain Slug to allow us to use hardware that we can easily source in our country (and hopefully others as well).
The assembly process is exactly the same apart from the imperial hardware replacements that we used. They should look very similar though. Here is a BOM:
| Hardware Description | QTY |
| M3x10 Hex Countersunk | 28 |
| Extension Spring 14mmx5mm | 1 |
| Nylon Spacer 20mmx5mm | 1 |
| Steel pin 1x18mm | 2 |
| 3mm Bungee Cord 20cm | 1 |
| Short Standoff M3x4mm | 5 |
| Long Standoff M3x40mm | 1 |
| Rubber Grommet 3.2mm ID | 1 |
| M5 Nut | 6 |
| M5x6 Hex Dome | 14 |
| M5x50 Hex Dome | 2 |
| M5 Locknut (Nyloc) | 1 |
| Talon Claw Bars | 8 |
| Plunger tube (38mm OD, 34.8mm ID) - 145mm length | 1 |
| Barrel (16mm OD, 13mm ID) - 30cm up to 40cm | 1 |
| K26 (replica) - cut to length of desired strength | 1 |
| Lube (Slug Slime) | 1 |