1 / 3
Fume Extractor with 120mm Fan
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case to use a 120mm fan and a Hepa filter to get rid of the printing fumes.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 58
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Get rid of printing smell and fumes with this 120mm fan filter.
You'll need to print:
- Shroud_fan
- Shroud_filter
- Duct (optional, but recommended due to better airflow)
Additionally you'll need:
- 120mm fan (I used a Nocuta fan running at 12V with a PWM controller)
- fan screws (4x without duct, 8x with duct)
- 4x wood screws
- Hepa filter (I used the Alveo3D Filter P3D-R but any filter fitting into a 116x116x41mm space would work)
- a square cutout in your enclosure 129x129mm