1 / 16
Sprinkler v2.1 (and v2.0, v1.1)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Powerful snail for high water flow.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 49
- Makes
- 0
- Views
- 319
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
When using a powerful pump and large areas of irrigation, a powerful tool is required. The spray angle is adjustable. When assembling the case, use super glue.
P.s. V2.0. For ease of printing, a disassemblable model has been created. For assembly and connection, you will need M4 screws and nuts (10 pieces each) and an M20x2 fitting.
P.p.s. V2.1. For connection, an external thread of 3/8" is used, which is more logical and practical than an internal M20*2mm.