Threadboard Butcher Block Mount(s) for 1.5" Butcher Blocks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use this to mount do butcher blocks with threaded inserts, M6
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I made these to allow me to use Threadboard attachments easily, (the threaded holes are . http://threadboards.com The threaded holes are 10mm deep. There are various depth sized on Threadboards, so make sure you select the correct size for the things you print from there.
Make sure to use Supports. Normal-Auto supports should be just fine.
I recently added these to my 1.5" thick butcher blocks, on center: https://a.co/d/0BcO6WN I used a center jig for drilling, and then tapped them with an M6 x 1.0 tap. I highly recommend make sure you are doing it correctly on a scrap piece of wood before drilling into your butcher blocks.
These are the bolts I used: https://a.co/d/f1FCY8H
The slotted holes in the model are 6" on center. They are slotted just in case some of the holes I drilled weren't exactly 6 inches on center.