Pioneer SPH-EVO62DAB screen bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Recreation of Pionaeer SPH-EVO62DAB screen bracket, thicker - best use m4x6 screws. Make sure to use ABS or better.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
As per title this is a recreation of Pionaeer SPH-EVO62DAB screen bracket but made slightly thicker to make up for being plastic. It'd be ideal to use M4x6 screws instead of the provided M4x5 (it's now 2.5mm thick instead of 1mm thick).
Make absolutely sure to print it out of ABS or better. PETG / PLA will not stand up to temperature in your car, especially because the radio itself gets really hot!
To print the other side of the bracket mirror it along one of the axes. Print with at least 3 wall loops, ideally 100% infill, best printed with supports and arachne wall generator to fill in the small gaps.