Angled Spacer for Stax SR 207
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Angled Spacer for Stax SR 207 10mm to 5mm, 10mm to 3mm ,15mm to 3mm
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A modified version of my spacer for the Stax SR-207.
The comfort was good, but I was never fully satisfied with the change in soundstage , it felt more distant and lacked the precision of the original setup.
This second model addresses that by adjusting the spacing: instead of a fixed spacing, it’s angled front to back.
Just like the original version, it uses the stock screws and is easy to install and remove.
Spacer Size :
10mm to 5mm
10mm to 3mm
15mm to 3mm (the one i used)
Print settings:
Material: PLA Black matt
Layer height: 0.16mm
Wall loops: 4
Infill: 25% (gyroid pattern)