Ford Maverick Fender Vent Cutout
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Template for adding a mesh to your Maverick's fender badges
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 54
- Makes
- 0
- Views
- 995
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
The PDF must be printed in 1:1 scale (not best fit) in order for the template to be sized correctly. I used 3M VHB to attach the mesh and cleaned all surfaces with 91% isopropanol. A hot knife works best for cutting out the center of the badge, and a selection of files will be useful in cleaning up the edges.
The fender badge is held in with 4 clips and a plastic pry bar is the best option for removing it. I suggest starting at the top middle to get the top one to pop out somewhat. Then do the side before getting the top 2 the rest of the way out. The bottom one was the hardest as there is not much space to pry against.