1 / 2
Typewheel 440 and 497 Italic for Blickensderfer typewriters — image 1
1 / 2

Typewheel 440 and 497 Italic for Blickensderfer typewriters

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Typewheel 440 scientific and 497 universal English Italic

Rating
0 / 5
Likes
3
Downloads
21
Makes
0
Views
128
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial — Share Alike

Italic English layout typewheels for the Blickensderfer typewriter. For scientific keyboard number 440 or universal keyboard layout wheel number 497.

Recommended to print on an FDM printer with 
 - a small nozzle; ideally 0.2 mm
 - small layerheight of not more than 0.1, ideally less
 - PLA (black) material for good surface and strong resilient wheel

After printing, apply a tiny drop of cyanoacrylate (superglue) to the stub on top of the wheel and give time to fully set.
Use a fine, round file to remove or smoothen any printing-imperfections of the inside mounting hole.
Bend a retaining clip from 0.5 mm steel wire (or use a small safety-pin).

Check for free-fitting on the shaft of the typewriter; the wheel should rotate freely on the shaft, but should have no play.

Tags