Another Core One Nozzle Wiper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Its goal is to be as inconspicuous as possible and not hinder the process of changing sheets.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 63
- Makes
- 5
- Views
- 578
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I know there are already many Core One Nozzle Wipers available.
Why another one?
I simply wanted one that was as inconspicuous as possible and, above all, did not hinder me when changing sheets.
I recommend printing with temperature-stable material.
You will also need Wipper Bambulab A1, 1 M3x10 screw + M3 nut.
Recommended layer height 0.15 without support, but brim or mouse ears may be necessary.
Replace the gcode in the printer start gcode G29 P9 X208 Y-2.5 W32 H4 with this one.
;G29 P9 X208 Y-2.5 W32 H4
;G0 X42 Y40 Z1.5 F10000; open Vent Mod
G0 X42 Y-14 Z1.5 F10000;
G0 X79 Y-10 Z2.5 F10000;
G0 X42 Y-14 Z1.5 F10000;
G0 X79 Y-10 Z2.5 F10000;
G0 X42 Y-14 Z1.5 F10000;
If you are using Jürgen's mod for automatic opening of the ventilation , remove the Semoiklon in the second line.
Please check the settings again using the menu on your printer.