SUP Inflation Adapter for Parkside Electric Air Pump
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick and easy-to-print adapter to inflate Stand-Up Paddleboards (SUPs) using a Parkside electric air pump.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 114
- Makes
- 0
- Views
- 633
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This 3D-printed adapter lets you connect your Parkside electric air pump (commonly sold by Lidl) to a standard SUP valve. No need for manual pumping anymore—just plug in and inflate with ease!
The adapter is optimized for a secure and airtight fit on both ends:
Pump side: Fits the round nozzle of the Parkside compressor.
SUP side: Compatible with most common Halkey-Roberts (HR) valves found on SUPs.
Features:
One-piece design
Contains seal out of TPU
Tight push-fit connections—no glue required
Tested with PLA and PETG (PETG recommended for durability)
Print settings:
Layer height: 0.2 mm
Infill: 30%
Supports: Yes, Tree
Orientation: Print tilted
Material: PETG preferred,
Disclaimer:
This adapter is intended for low-pressure pre-inflation. Most SUPs still need to be topped off to full pressure using a hand pump. Do not leave the pump running unattended.