SUP Inflation Adapter for Parkside Electric Air Pump
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick and easy-to-print adapter to inflate Stand-Up Paddleboards (SUPs) using a Parkside electric air pump.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 633
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This 3D-printed adapter lets you connect your Parkside electric air pump (commonly sold by Lidl) to a standard SUP valve. No need for manual pumping anymore—just plug in and inflate with ease!
The adapter is optimized for a secure and airtight fit on both ends:
Pump side: Fits the round nozzle of the Parkside compressor.
SUP side: Compatible with most common Halkey-Roberts (HR) valves found on SUPs.
Features:
One-piece design
Contains seal out of TPU
Tight push-fit connections—no glue required
Tested with PLA and PETG (PETG recommended for durability)
Print settings:
Layer height: 0.2 mm
Infill: 30%
Supports: Yes, Tree
Orientation: Print tilted
Material: PETG preferred,
Disclaimer:
This adapter is intended for low-pressure pre-inflation. Most SUPs still need to be topped off to full pressure using a hand pump. Do not leave the pump running unattended.