1 / 3
Lian-Li Lancool 207 Dust Protection and Airflow Optimization
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A press-fit plate to block dust entry from the rear of the case and mitigate warm air short-cycling.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 85
- Makes
- 1
- Views
- 621
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently built a new PC and was impressed by the aesthetics and performance of the Lian-Li Lancool 207 case. However, I found a design flaw at the rear of the case. The large hexagonal mesh has two issues:
- The bottom fans can suck in large dust particles. This is a particular issue for users (like me) who have the case on the ground.
- The opening is right next to where the warm air exhausts. In theory, this presents an opportunity for warm air to re-enter the case.
My solution is a simple press-fit plate that covers the hexagonal mesh at this section:
- While not a hermetic seal, I have not found any more dust bunnies in my GPU.
- Completely walling off this section hasn't perceptibly changed thermal performance; however, I have some peace of mind knowing that design best practices are now implemented.
I have included the .STEP file should you need to tune the peg sizes for your printer.
