1 / 3
Upgraded USB FAN symmetry fixed, scaled down (176.5mm) — image 1
1 / 3

Upgraded USB FAN symmetry fixed, scaled down (176.5mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Quick remix of R3Design's USB Fan mod

Rating
0 / 5
Likes
3
Downloads
20
Makes
0
Views
118
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Slightly modified version, fan is noticeably quieter but slightly wobblier. But luckily it's not wobbly enough to cause the fan to make any additional noise or vibrate.

My reccomended Print settings:

Use a dedicated support material if you have multiple nozzles

  • On a BambuLab do not adjust the support interface z-distance. (was recommended in the original)
  • Print as fine as possible (0.08mm), although slightly more coarse seems to work okay
  • Print on normal supports, don't use tree supports
  • Use concentric top surface pattern for a better geometry on finished fan blades
  • Print on a 2 or so layer raft if the sections touching the buildplate turn out weird

Tags