1 / 3
Upgraded USB FAN symmetry fixed, scaled down (176.5mm) — zdjęcie 1
1 / 3

Upgraded USB FAN symmetry fixed, scaled down (176.5mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Quick remix of R3Design's USB Fan mod

Ocena
0 / 5
Polubienia
3
Pobrania
20
Wydruki
0
Wyświetlenia
118
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Share Alike

Slightly modified version, fan is noticeably quieter but slightly wobblier. But luckily it's not wobbly enough to cause the fan to make any additional noise or vibrate.

My reccomended Print settings:

Use a dedicated support material if you have multiple nozzles

  • On a BambuLab do not adjust the support interface z-distance. (was recommended in the original)
  • Print as fine as possible (0.08mm), although slightly more coarse seems to work okay
  • Print on normal supports, don't use tree supports
  • Use concentric top surface pattern for a better geometry on finished fan blades
  • Print on a 2 or so layer raft if the sections touching the buildplate turn out weird

Tagi