1 / 4
Nikon F3 MD-4 Motor Drive Terminal Cap Covers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement terminal cap covers for the Nikon F3 MD-4 motor drive attachment.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 77
- Makes
- 0
- Views
- 232
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
Replacement caps/covers for the Nikon F3 MD-4 motor drive attachment.
Printing Recommendations:
- Use the lowest layer height possible so the threads are properly formed. I used a 0.12mm layer height.
- 100% infill
- Depending on your local weather or use case, consider printing with ASA or a material with a higher glass transition temperature than PLA. I have not experienced any warping but I could see it happening in certain situations.
The external power terminal (smallest cap) is identical to the Nikon F3 flash sync terminal.
For the curious, the thread sizes are:
- External Power Terminal: M7 x 0.5
- Remote Terminal: M9 x 0.5
- Magazine Back Terminal: M11 x 0.5
