Seekins Precision HAVAK LOP Spacers (Ph2/Ph3 - Maybe Element)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spacers to increase the length of pull on the Havak Series Ph2 and Ph3 rifles. Not tested with Element Rifles.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 72
- Makes
- 0
- Views
- 340
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are LOP spacers for PH3 rifles. Untested with Element, but research suggests they have a similar pattern to PH2/PH3's.
Three Sizes to offer:
- .25 in (Use 1/4-20 X 1.00" Hex screws)
- .50 in (Use 1/4-20 X 1.25" Hex screws)
- .75 in (Use 1/4-20 X 1.50” Hex screws)
- 1 in (Use 1/4-20 X 1.75” Hex screws)
*Max torque 20 in/lbs (don't ove do it)
They are stackable, but depending on your printers settings you may have to do some light sanding/removal to the print to make it fit appropriately. All connected edges have some chamfering to allow for normal stacking without modification if your printer is dialed in.
Orient your print files and support accordingly. I suggest the insert porting facing down with support enabled.
Print with ASA, ABS, or PETG.
Disclaimer:
Any modifications made to a firearm are done strictly at your own risk. Always prioritize safety and ensure compliance with all applicable local, state, and federal laws. Improper modifications can result in serious injury, death, or legal consequences. It is strongly recommended that all modifications be performed by a qualified gunsmith or certified professional. By proceeding with any alteration, you assume full responsibility for the safe handling, use, and consequences of the modified firearm.