1 / 24
Spare parts and Remodel for the Stax SR-5. — image 1
1 / 24

Spare parts and Remodel for the Stax SR-5.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A complete Remodel and set of spare parts for the Stax SR-5 headphones.

Rating
0 / 5
Likes
0
Downloads
16
Makes
0
Views
88
Reviews
0

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution — Noncommercial — Share Alike

Hi,

I was able to acquire a pair of old-but-gold Stax SR-5s. The only problem was that some parts were missing, and what was left was falling apart the plastic was cracking everywhere. But the driver and the "energizer" were working perfectly.

What started as a simple mod to replace the side pieces that hold the earpieces turned into a full remodel. It was a good excuse to start 3D modeling for 3D printing (I’m a professional 3D artist for video games and movie).

Does it sound better than the original?
No, well… not right now. Currently, the sound is a bit too echoey. I’m pretty sure that’s due to poor print settings, so I’ve included some recommendations. From what I’ve gathered, I didn’t use the right settings: there wasn’t enough infill, I used the wrong type of infill, and in my experience with the Stax SR-207 spacers, the walls should be at least 4 layers thick.
 

What is compatible and a one to one replacement ?
-Stax_SR_5_Sides_Holder
-Stax SR-5_Ornament

What changed from the original design?
I had to make a few modifications on the earcups. 
- I left a gap where the cable goes through because I didn’t want to resolder it.
- The grill holes were originally designed to be small, but my printer wasn’t precise enough. In the end, I decided to remove them completely and just make one big opening. This exposes the driver, so you’ll need to protect it the best way is by replacing the earpads. 
- Both options (with and without grill holes) are included.

Here’s the link for the earpads I bought (not affiliated): aliexpress

What about the non-plastic original parts?
I kept everything and reused all the original components: screws, grill dampener, filters — everything is reused!

So I don’t need new parts to do it?
No! You already have everything you need to repair or reprint everything.

Print settings:
• Material: PLA Black matt
• Layer height: 0.16mm
• Wall loops: 4
• Infill: 25% (gyroid pattern)


Support me: Always appreciated, never required.
https://ko-fi.com/tonedreams

Tags