Nahdar Vebb Lightsaber
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nahdar Vebbs Lightsaber from The Clone Wars!I like the simplicity of this saber and didnt see another model available.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 41
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
Nahdar Vebbs Lightsaber from Star Wars: The Clone Wars!
I like the simplicity of this saber and figured it was easy enough to design in tinkercad. The only piece i believe could be more screen accurate is the pommel, it should have a more rounded shape.
Other than that i like how this design turned out.
I did not list this as a remix however i did use the Emitter from the Ahsoka Lightsaber and the Grip Pegs from Mace Windus both designed by "CaseStudyno8".
I have not printed this saber yet and i will update the files if i encounter any issues. As of now the only part I'm not confident in is the fit for the Grip Pegs into the Grip.
**The grip is over 150mm tall, i use a delta style printer with a max print height of 360mm. If needed i can adjust the grip into multiple parts for easier printing.
PARTS TO PRINT:
- Print one of each part and 6 of the Grip Pegs
ASSEMBLEY: Use Super Glue
- First glue the pommel to the grip
- Then glue the 6 Grip Pegs to the grip
- Glue the Button to the button disc, then glue the disc to the grip.
- Finally glue the Emitter Peg to the grip, then the guard over the peg, then the emitter over the guard.
UPDATES:
10/25/22
- Increased the size of the grip to 235mm, now makes the overall saber about 10.75". Before it wasn't tall enough for a 2 handed fit.
- Adjusted the the height of the grip pegs to fit the grip, to tall before. Pegs are now 139mm tall and 4.25mm. Should fit the grip more snug.
- Beefed up the pommel to closer match the appearance in the show
10/8/25
Only took 3 years to revist and finish this model!
- Reworked all of the files, i gave each of them a much smoother texture.
- Reworked the Grip peg: i removed the dimension it had on the bottom and made it square for easier printing and installation. Also made it a bit taller to account for the new deeper holes on the grip.
- Reworked the Grip: I adjusted the grip peg holes for the new shape, i also made the holes a bit deeper so the pegs could be insterted more easliy.
Printer:
FLSUN QQS
Longer LK5 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
25
Filament: Hatchbox and CC3D PLA Silk Silver, Black