X2 Buster for Zero Rockman X (Mega Man) Kotobukiya Kits
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a pseudo replica of the Kotobukiya Zero Buster from Rockman X2. It's not a "perfect" replica but it's close enough.
I made this to have a black version to go with the Black Zero kit, as it was not provided.
Feel free to use it as a buck to make custom busters.
(This is a mirror of the original post on Thingiverse)
Print Settings
Print the spine with the nozzle side up.
The gem works best printed in translucent material.
The color separated version works, but will require a bit of cleanup and potentially some glue. Specifically on the white elbow parts.
How I Designed This
Included are a few options: A single print piece, a solid piece with no gem and a fully color separated version.
I printed and tested the full version and it works like a charm.
Zero's elbow peg is 3mm, the hole is sized at 3.1mm. Do not overly force installation, ream the hole out if necessary to prevent damaging your model kit.