SSD or HDD 2,5" STORAGE with a drawer for screws
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
NO SUPPORTS SSD or HDD 2,5" STORAGE with a drawer for screws, every reasonable settings, any filament you like
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 90
- Makes
- 0
- Views
- 504
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
No of the present models suited my needs, so I've designed this one
- NO SUPPORTS needed
- I've print it using PETG and 5 perimeters, but 3 perimeters seem to be enough (I think every reasonable settings with any filament your printer support will fit).
- approximately 200g of filament
- The drawer is intended for SSD/HDD screws.
- 4 legs for a tabletop position
- 2 holes for wallmount position
_____________________
Такая вот стойка стенд полка хз что это.
Не нашел ничего подходящего, нарисовал модельку для себя, на стол поставить или на стену повесить. ХДД и ССД 2,5 дюйма подходят, толщина до 9мм. Ножки для того, чтобы стояло. Дырдочки чтобы на стенку прикрутить :)
Печатать можно чем угодно и как угодно, главное слоев побольше. Грамм 200 пластика уйдет.
В выдвижной ящик можно болтиков насыпать, или семок, или заначку устроить :)
