SKY TOPPOWER HD-937D 60W Base Organizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A place to store the soldering station in one piece.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
SKY TOPPOWER HD-937D 60W Soldering Station with digital display:
https://www.amazon.com.au/60W-Soldering-Station-Solder-Electronic/dp/B0BN1BG11V
May work for the B version, untested as I don't own it but it looks identical.
https://www.amazon.com/Anti-Static-Soldering-Iron-Station-Kit/dp/B08868BVRT
This soldering station is fantastic, but lacks a container for storage. This base will let you keep the pieces together and organized neatly. There is a drawer with bit holders, and several spaces to place your solder / inserts / other bits.
The unit takes up about 199mm x 170mm so should work fine with most build plates.
Printed at 0.2mm layer height, NO SUPPORTS NEEDED. Pictured above is PETG Grey and PLA Matte Beige for the drawer.
Tolerances are mostly 0.1mm for snug fits. If you can not manage close to 0.1mm tolerances you may struggle to fit everything cleanly.
There is a slot for 2 10x2mm magnets (the ones used for GEN2 drawers) to allow the drawer to snap shut if you prefer, or if the tolerances are too loose for you. My drawer shuts just fine without it.
Warning: I should remind you that this station should not be used while the iron is on lest you cause any serious damage. It is intended as a storage solution only, please do not burn anything down.