1 / 9
Titan All-In-One Cooler Capswap module - 92/120/140mm fan mount — image 1
1 / 9

Titan All-In-One Cooler Capswap module - 92/120/140mm fan mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cap for mounting a 92/120/140mm fan

Rating
0 / 5
Likes
22
Downloads
46
Makes
0
Views
742
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

A common problem with AiOs and modern CPUs is the lack of VRM cooling around the CPU socket. With this adapted cap you can mount any 92/120/140mm fan (with a 82,5/105/125mm hole spacing) to ensure sufficient airflow over the VRM componnents.

Following variants are available:

  • 92mm
    • normal (V1, V2)
    • low profile (V1, V2)
    • low profile (extra shallow) (V1 only)
  • 120mm
    • normal (V1, V2, V3)
    • improved airflow (V1 only)
    • low profile (V1, V2)
    • low profile (extra shallow) (V1 only)
  • 140mm
    • normal (V1, V2)
    • low profile (V1, V2)
    • low profile (extra shallow) (V1 only)

The complete height (with the cap holder) is 44mm without a fan, the low profile version is 10mm shallower than the normal variant.

Update 03.07.2025:

Added V2
  • Improved the airflow over the cap body and around the fan arms
  • Cap should be printable without any supports, depending on how your printer handles overhangs; the SFF variant should be harder to print without supports on the arms
  • Added print files for the V2 normal 92/120/140mm variants for the CORE One (untestet)

Update 06.07.2025:

Added V3 (experimental)
  • Removed the arms and added an “air guide” to further reduce airflow obstruction; the fan would be mounted only by two fan screws 
  • The orientation would be fixed with the mounting points on the bottom as most VRM components sit on the upper, left and right sides of the CPU socket
  • Supports will be needed with this version
  • This is an experimantal version only for the 120mm fan, let me know if you want improvements or variants of it

Update 26.07.2025:

Revised V2
  • small improvement around the radius between the fan mount and the connector arms for better stability

Tags