Microsoft Surface 3/5/6 Pro and Surface Pro 5 (1796) and Pro 6 Tablet Wall Mounting Bracket (Landscape Orientation)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount hanger for the Microsoft Surface 3, 5, and 6 tablets!
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 190
- Makes
- 0
- Views
- 912
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall mount for a Surface 3 Pro and Surface Pro 5 (1796) Tablets in Landscape Orientation.
I raised each corner with a gap height of 9.55 millimeters to fix the model. I also added fillets to the bottom edges of each corner to increase layer strength - this should prevent the corners from snapping off at the layer line.
PETG is my preferred material. Print with 4 layers bottom, 4 layers top, 25% infill of your choice. If you are printing with PLA, I'd recommend using 100% infill as my tablet gets hot and it may warp PLA over time.
OPTIONAL: Before printing, Add cylinder shaped modifier blocks with 100% infill for each of the four corners (Please see attached images detailing how to do this in Orca Slicer) for additional strength.
My Surface 3 Pro Tablet is Model 1631 with 256GB storage.
I recommend verifying your Surface tablet heights to ~9.55mm's at each corner with measurement calipers before printing.
Please comment if you found this useful or if you have any design change suggestions!
Attached are a Fusion .f3d file, both .step files for the left and right side for your own modifications.