Microsoft Surface 3/5/6 Pro and Surface Pro 5 (1796) and Pro 6 Tablet Wall Mounting Bracket (Landscape Orientation)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount hanger for the Microsoft Surface 3, 5, and 6 tablets!
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 190
- Wydruki
- 0
- Wyświetlenia
- 912
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall mount for a Surface 3 Pro and Surface Pro 5 (1796) Tablets in Landscape Orientation.
I raised each corner with a gap height of 9.55 millimeters to fix the model. I also added fillets to the bottom edges of each corner to increase layer strength - this should prevent the corners from snapping off at the layer line.
PETG is my preferred material. Print with 4 layers bottom, 4 layers top, 25% infill of your choice. If you are printing with PLA, I'd recommend using 100% infill as my tablet gets hot and it may warp PLA over time.
OPTIONAL: Before printing, Add cylinder shaped modifier blocks with 100% infill for each of the four corners (Please see attached images detailing how to do this in Orca Slicer) for additional strength.
My Surface 3 Pro Tablet is Model 1631 with 256GB storage.
I recommend verifying your Surface tablet heights to ~9.55mm's at each corner with measurement calipers before printing.
Please comment if you found this useful or if you have any design change suggestions!
Attached are a Fusion .f3d file, both .step files for the left and right side for your own modifications.