1 / 5
Magic: The Gathering - Deck Holder - No Supports - Commander 100 Sleeved Cards - Top & Bottom Draw
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A two part deck holder made for an EDH format deck with 100 sleeved cards
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 100
- Makes
- 0
- Views
- 411
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This deck holder was made to hold 100 sleeved cards during a game of commander. It's on an angle to help the cards stay in place when you draw them.
It's dovetailed to allow it to be put in a bag without taking up too much room.
Should be printed on the side to maintain the cutouts of the MTG icons as well as require no supports.
It fits un-sleeved cards just fine, but there is obviously way more room so they slide around.
Recommended print settings
5-10% infill
3-4 wall loops
No supports (if printed split and on the side)