1 / 1
Alternate Bearing for Nail Polish Carousel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Alternate bearing that prints well on the MK4S.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
The original bearing for this model wasn't printing well on my MK4S and kept falling apart. I used a bearing from Matvey Kukuy's - Ultimate 608 Bearing with Calibration Kit V2 (https://www.printables.com/model/276409-ultimate-608-bearing-with-calibration-kit-v2), instead and modified it to fit this model.
Print Settings:
- PLA+
- 0.4mm nozzle
- 1.5mm (structural)
- 100% infill
- No supports
You might have to loosen up one or two of the rollers after the print completes, but after that you will have a working, well-fitting, bearing for this model.
Thanks for your model. My daughters love it.