2020 Extrusion Panel mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This panel mount allows Plexiglas panels or other panel materials to be mounted within 2020 aluminum extrusion frames.…
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 52
- Makes
- 0
- Views
- 1,416
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This panel mount allows Plexiglas panels or other panel materials to be mounted within 2020 aluminum extrusion frames. I used them to add a panel to the bottom of my HyperCube printer. The mounts provide the advantage of placing the mounting hole well away from the edge and putting gentle pressure on a wider area rather than a concentrated screw hole so that cracking is less likely . Using these mounts also makes the panel easy to remove without internal access.
To use these panel mounts, drill a 6 mm hole in the panel 12 mm from the edge. Attach the mount with the bushing and a 3 mm x 8 mm screw and washer. Use a 5 mm screw and extrusion T-Nut to mount the other end to your 2020 extrusion. The bushing hole is self tapping.
The mount is designed for 3 mm thick panels but can be used with thicker panels. For thinner panels, you may need to shorten the bushing.
This is the HyperCube Printer I am using these panel mounts on. http://www.thingiverse.com/make:272257
Print Settings
Printer:
HyperCube
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
50%
Notes:
PLA is fine, ABS even better
Category: 3D Printer Accessories