1979 Camaro glove box replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for a 1979 Camaro Berlinetta glove box (no AC)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is a replacement for a 1979 Camaro Berlinetta glove box. the original is made out of cardboard and after several decades needed to be replaced.
I had to split this into 2 parts for it to fit in my printer. This should print on a 256x256x256 print bed.
This will not work on Camaros with the AC vents still installed. I had to modify the original design for 3d printing.
You will need to use supports, It worked for me using organic supports.
The two halves should slide together. I used super glue to hold them. Then they should slide into the clips on the dash.
I removed the hole for the light as we decided to remove that on our car.
I've only tested this on a 1979 Camaro Berlinetta, but it might work on other 1978-1980 camaros without ac