1 / 1
Margarita Salt Rimmer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a quick print before July 4th! printed in Vase mode (or Spiralize Outer Contour mode) it only uses 10g
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 40
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a quick print before July 4th! Printed in Vase mode (or Spiralize Outer Contour mode) it only uses 10g of filament. You provide the salt and a Margarita glass. Model is 3/8" high and 5 ½" in diameter. Feel free to use the scale tool if you want shorter or smaller.
Tip; print two of them, they stack, and put a little lime juice in one. Dip in the lime, dip in the salt and you're done!
Buy me a Coffee: